Sony CCD-FX510 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
By pressing «. locate the start point where the
insert should begin.
REW9
S At the start point, set the camcorder
into recording pause mode.
Slide REC in the direction of the arrow with PAUSE
pressed.
PAUSE
•j|EC
6
Press ZERO MEM.
The end point of the insert is stored
in memory.
ZERO MEM
couKTC» rams»—
•g;Q
Press II PAUSE on both units to start insert editing.
You can monitor the picture being inserted in the
viewfinder screen.
PAUSE
%
The insert recording will stop automatically near the zero point on the counter.
Changing the end point
Press ZERO MEM so that the ZERO MEM indicator disappears, and repeat again from
step 2.
60
Advanced Camera Operation