Íj.ocation and function of controls, Transcribing, Em bbee – Sony M-2000A User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
íj.ocation and Function of Controls
|23|
Foot control unit (supplied)
Em BBEE
Q OC IN 9 V lack (external power input) jack
[^OPR (operation) indicator
The indicator illuminates during tape operation.
(Tl REC (record) indicator
The indicator illuminates during recording.
Q
±
EJECT (cassette eject) lever
[U CONTROL UNIT connector
fT| MIC (external microphone) (PLUG IN POWER)
Q EARPHONE jack (minijack)
|T| MIC (builMn microphone)
fs] SPEED selector
2.4 cm: A 60-minute recording can be made using
both sides of the MC-60 Microcassetle. This
setting produces optimum sound and is
recommended for normal use.
1.2 cm: A 120-minute recording can be made using
both sides of the MC-60.
REVERSE TIME (0/1/3)
(autobackspace time) control
[lT| TONE control
Slide toward H (high) to reinforce treble, and L (low) to
weaken it.
fig) -44REW (rewind) button
SPEED CONTROL (tape speed control)
[^VOLUME control
[is] FF (fast forward) button
► PLAY button
fi^ Recording (STOP/REC) switch
[iijHSTOP button
RESET button
Press to reset the counters to zero.
@ Tape counter
Cassette compartment
(H] BuilMn speaker
Rewind pedal
|g4| Playback pedal
Transcribing
Before operating the unit, connect the AC power adaptor to
a wall outlet.
1 Slide EJECT and insert a cassette.
2 Set SPEED to the same tape speed as that
used for recording.
3 Keep the right side of the pedal depressed
to listen to the tape.
4 Adjust VOUJME and TONE.
To
Stop the tape, release the pedal.
You can control the unit with the buttons on itself as well.
Use of foot control unit
The foot control unit leaves your hands free, enabling
you to control this transcriber with your focrt.
Auto backspace
The tape rewinds a little each time it is stopped and the
last few recorded words can be reviewed when you
resume listening. Adjust REVERSE TIME to the desired
length (1 position: 1 second, 3 position: 3 seconds) At
the 0 position, the tape stops without rewinding at all.
This functions only when the foot control unit is used.
Speed control
The tape speed is adjustable with SPEED CONTROL.
The tape runs at normal speed with the control set to the
center click position.