Sony SLV-M10HF - Manual (Page 100)

To unlock the protected program
Push the cursor stick to ^ in step 4 above. The ft indicator disappears and
you can record over this program.
Tips
• When you start recording from a position prior to the protected program, the
recording automatically stops no more than about three minutes in SP mode and
about eight minutes in EP mode before the beginning of the protected program.
• If you protect a program just after the Blank Time space, BLANK TIME becomes
shortened by about three minutes in SP mode and about eight minutes in EP mode
• If you try to record on a SmartFile tape containing a protected program, a message
indicating that there is a protected program on this tape appears on the TV screen.
Notes
• When you record another program just after a protected program, locate the
beginning of the Blank Time space by following the instructions in "Recording after
locating the Blank Time space" on page 91, Otherwise, if the recording start point
overlaps the protected program, the VCR may over-record the protected program.
• If the VCR Plus-i- or timer recording program overlaps the protected program, the
VCR automatically stops recording before the protected program and ejects the
tape.
• If you insert a SmartFile tape which contains a protected program or protect a
program for the first time on a new tape, the VCR will analyze the position of the
protected program for a few seconds. You cannot operate the VCR while the \ CR
is
analyzing the tape.
• If the SmartFile list contains 12 protected programs, the next program you record
won't be stored in the SmartFile list.
SmartFile function