Sony SLV-M10HF - Manual (Page 21)

Hookup 4: VCR setup
1 Set the RF UNIT switch to ___________
CH 3 or CH 4, whichever ■iilBBIt
chanirel is not used in your ^
area. If both are used, set the
—
switch to either channel. For
details, see page 105.
If you made A/V
connections (from page 9),
you can skip this step.
2
Turn on your cable box.
3
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press the cursor stick (OK). For details, see
page 32.
© The CLOCK SET menu appears. Select
MANUAL, press the cursor stick (OK), and set
the clock manually. For details, see page 37.
O The SMART CH MAPPING menu appears.
Push the cursor stick to ^ to enter
the ZIP/POSTAL CODE in your area and press
the cursor stick (OK). (You can also use the
number buttons to enter the ZIP / POSTAL
CODE.)
O The CABLE BOX menu appears. Select OFF and
press the cursor stick (OK).
©
RF UNIT
CH3 CH4
~w
© The TUNER PRESET menu appears. Set
ANTENNA/CABLE to ANT and press the
cursor stick (OK). For details, see page 44.
ESPAÑOL
FRANÇAIS
Use it M to select
Then push |QKl
Push [EASY SETU^ to qud
ÌÀÌJTQ IMAÑUALI
Use |♦^♦| to select
Then push IÔK)
Push lEASY SETH^ to quit
ZIP / POSTAL CODE
Enter your ZIP/PQSTAL
CODE us i ng |0-9l o r [t_tj
and @3 keys.
I hen push [OKI__________________
CABLE BOX CONTROL
CABLE MOUSE ESTE]
Use da. to select
Push lEASY SET UP| to quit
ET31ITs^H ■nnsgaasisai
ANTENNA/CABLE
(ÁÑT KABLll
Use t 0 select
Then push
Push lEASY
SET UPt to quii
continued
Getting Started