Adjusting color registration (convergence) – Sony KP-53V15 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Color Registration (CONVERGENCE)
In a projection TV, the projection tube image appears on the screen in three color
layers (red, green and blue). If these layers are not in proper registration, the
color is poor and the picture blurs. To correct this, perform the CONVERGENCE
adjustment.
1
Press MENU.
The main menu appears.
ъ
►BOPROG PALETTE
ВамООЕ SET
©TIME
BSET UP
mENGLISH
SCONVERGENCE
MttcT^ MUM fiitana
Press A/V WINDOW +/- until the cursor points to “CONVERGENCE."
A/V WINDOW
S
IZIPROG PALETTE
БЗН00Е SET
©TIME
BSET UP
fflENGLISH
►^CONVERGENCE
nUCT$
HTM> tilt
пив
3
Press RETURN.
The CONVERGENCE semen and the ooloted adjustment lines appear.
RETURN
Press A/V WINDOW
+f-
until the cursor points to the symbol representing
the line you want to adjust (see the key below).
A/V WINDOW
a
B h
EICONVEF[GENCE
MU{T$ Ml
► r
5
m tiitiHB
Adjustment line symbols key
I (red vertical; left/right adjustment)
— (red horizontal: up/down adjustment)
t (blue vertical: left/right adjustment)
—• (blue horizontal: up/down adjustment)
24
Chapter 1: Setting Up