Sony SLV-688HF - Manual (Page 23)

Hookup 5: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used,-set
the switch to either channel.
For details, see page 69. If
you made A/V connecfions
(from page 8), you can skip
this step.
2
Turn on your DSS receiver.
3
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press ÔK. For details, see page 28.
© The CLOCK SET menu appears. Set the clock
and press OK. For details, see page 29.
0 The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 31.
O Enter your DSS receiver code number and
press 4. For details, see page 32.
© Set your DSS receiver
. output channel (BOX
OUTPUT CH) to LINE
and press OK.
SET UP
CABLE BOX CONTROL
CABLE MOUSE »ON OFF
BOX CODE NO.
►BOX OUTPUT CH -' line "-
USE •</► TO SELECT CABLE
BOX CH. THEN PUSH OK
SET UP
LANGUAGE
► ENGLISH
ESPAÑOL
FRANÇAIS
NEXT
CANCEL OK
EASY SET UP
SET UP
CLOCK SET
; 1 998 TH 12.00Í'.'
NEXT OK
CANCEL . EASY SET UP
SET UP
CABLE BOX CONTROL
►CABLE MOUSE •ON OFF
BOX CODE NO. —
BOX OUTPUT CH CH3
SELECT </►
CANCEL : EASY SET UP
SET Uf=’
CABLE BOX CONTROL
cable MOUSE
► BOX CODE NO. ----- -
BOXOUTPUTCH 'CW3'
ENTER YOUR CABLE BOX
CODE NO. USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
SETUP
SET UP IS DONE
Normal display
Getting Started j 23