Sony SLV-688HF - Manual (Page 5)

step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and - on the
batteries to the diagram inside the ^
battery compartment.
Insert the negative (-) end first,
then push in and down until the
positive (+) end clicks into position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with
a dot (•) can be used to operate
your Sony TV.
Remote sensor
--------- s
“ 1 1
L®®®j —-----------
© oe-
‘CD CDO
CD CD CD CD
'O © ®
4 t \/1/[ VÍDEO
To operate Set dVl/|VIDEO to
the VCR 1 VIDEO! and point at the remote sensor on the VCR
a Sony TV TVJ and point at the remote sensor on the TV
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
continued
Getting Started 5