To ensure correct operation, Signal flow, To check the cable box control setting – Sony SLV-688HF User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up cable box control (continued)
To ensure correct operation
• Place the Cable Mouse so that it hangs out over the cable box/DSS
receiver front.
• Do not place the cable box/DSS receiver on top of the VCR.
• Position the cable box/DSS receiver away from the VCR.
• Point the remote commander at the VCR, not at the cable box/DSS
receiver.
/
----1 >
Side view
^
1
(f
-^—4---------
: Signal flow
o o o c
OOO
O ® O
O O O
b o g s
To check the cable box control setting
1
Press CH+/-on the remote commander. Does the channel indicate
on the cable box/DSS receiver change? (Point the remote commandt
the VCR, not at the cable box/DSS receiver.)
2
Press all 10 number buttons (0 to 9) on the remote commander. Doe
the channel indicator on the cable box / DSS receiver change?
If the answer to both 1 and 2 is "yes," you have made the correct setting.
34 i Getting Started