S-link connections, Connecting s-link to a vcr, Connecting s-link to a dbs – Sony KV-32V68 User Manual
Page 14: Note, Connecting and installing the tv (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continued)
S-Link connections
S-Link is designed to allow your Sony
components to "communicate."
Connecting S-Link to a VCR
S-Link will automatically power on the TV and
switch to the correct video input when a tape is
inserted in the VCR.
1
Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.
2
Using an S-Link connector (mini plug),
connect S-LINK/CONTROL S-IN on your
VCR to S-LlNK on your TV.
Connecting S-Link to a DBS
S-Link will automatically power on the TV and
switch to the correct video input when you
power on the DBS.
1
Using A/V connectors, connect AUDIO and
VIDEO OUT on your DBS to AUDIO and
VIDEO IN on your TV.
2
Using an S-Link connector (mini plug),
connect S-LINK on your DBS to
S-LINK on your TV.
Note
• Do not connect S-Link to the G-Liirk jack on your
TV.
10
The S-Link connector must be in the
same VIDEO-IN jacks as the A/V cables
on your TV.
DBS Receiver