Using the remote commander, Note on display button, Using headphones – Sony CCD-TRV62 User Manual
Page 23: To view the playback picture in the viewfinder, Note on the lens cover, To view a still picture (playback pause), To locate a scene (picture search), To view the picture at 1/5 speed (slow playback), To select the playback sound, Notes on playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back a tape
Using the remote commander
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the size AA (R6) batteries.
Note on DISPLAY button
Press DISPLAY to display the screen indicators on the LCD screen. To erase the
indicators, press DISPLAY again. If the POWER switch is set to CAMERA, you can
erase the indicator by pressing DISPLAY.
Using headphones
Connect headphones (not supplied) to the d jack. You can adjust the volume using
VOLUME, when you use headphones, the speaker on the camcorder is silent.
To view the playback picture in the viewfinder
Close the LCD panel. The viewfinder turns on automatically. When using the
viewfinder, you can monitor sound only by using headphones.
To view on the LCD screen again, open the LCD panel. The viewfinder turns off
automatically.
Note on the lens cover
The lens cover does not open when the POWER switch is set to VTR. Do not open the
lens cover manually. It may cause malfunction.
Various playback modes
You can enjoy clear pictures on the LCD screen during still, slow and picture search.
(Crystal-clear still/slow/picture search)
To view a still picture (playback pause)
Press
I I
during playback. To resume playback, press
I I
or O.
To locate a scene (picture search)
Keep pressing ◄◄ or ►► during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing the tape or
rewinding (skip scan)
Keep pressing while rewinding or ►► while advancing the tape. To resume
normal playback, press 1>.
To view the picture at 1/5 speed (slow playback)
Press !► on the Remote Commander during playback. To resume normal playback,
press ►. If slow playback lasts for about 1 minute, it shifts to normal speed
automatically.
To select the playback sound
Change the "HiFi SOUND" mode setting in the menu system.
Notes on playback
• Streaks appear and the sound is muted in the various playback modes.
• When playback pause mode lasts for 5 minutes, the camcorder automatically enters
stop mode.
23