Battery life, Notes, When the battery case is installed – Sony CCD-TRV62 User Manual
Page 26: To remove the battery case, Using alkaline batteries, Using alternative power sources, Remove the battery holder from the battery case
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using alternative power sources
Using alkaline batteries
Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not
supplied).
(
1
)
Remove the battery holder from the battery case.
(
2
)
Insert six new alkaline batteries into the battery holder, following the marking
on the holder to be sure the batteries are installed in the correct direction.
(
3
)
Insert the battery holder with the alkaline batteries.
(
4
)
Insert the battery case with the alkaline batteries to the battery mounting
surface of the camcorder in the same way as the battery pack.
Battery life
Using Sony alkaline batteries at 77°F (25°C).
Upper numbers are the time when recording with the viewfinder. Lower numbers are
the time when recording with the LCD screen.
CCD-
TRV62/TRV72
TRV82
Continuous recording time
165 min.
165 min.
105 min.
100 min.
Typicai recording time
95 min.
95 min.
60 min.
55 min.
Notes
• You may not use the battery case in cold environment.
• The battery life may be shorter depending on the using environment.
• The above battery lives are estimates. The battery life may be shorter depending on
the storage condition of the battery before being purchased and temperature.
When the battery case is installed
Slightly raise the viewfinder when you use the camcorder.
To remove the battery case
The battery case is removed in the same way as the battery pack.
When you replace the batteries, be sure to remove the battery case from the camcorder
to prevent malfunction.
26