Sony CCD-F33 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Power Sources
B-6
B-7
Using the AC Power Adaptor
1 Connect the AC power adaptor to a wall outlet.
2 Align the right side of the connecting plate with
the line on the recorder, and while pressing the
connecting plate, slide it to the right.
3 Set the VTR CHARGE selector of the AC
power adaptor to VTR.
To remove the connecting plate for the AC
power adaptor from the video camera
recorder
While pressing the BATT knob on the recorder,
slide and pull out the connecting plate.
Other options
The AC-V5S or AC-V30 AC power adaptor can also
be used to operate this recorder on house current.
Using the Car Battery
The DCP-55 DC pack (optional) is required.
1 Insert the DCC-16B car battery cord supplied
with the DCP-55 DC pack into the DC IN jack
on the DC pack.
2 Align the right side of the DC pack with the line
on the recorder, and while pressing the DC
pack, slide it to the right.
3 Connect the DCC-16B car battery cord to the
cigarette lighter socket of a car (12 V or 24 V).
To remove the DC pack from the video camera
recorder
While pressing the ВАТТ knob on the recorder,
slide and pull out the DC pack.
Other options
The AC-V55 AC power adaptor and the OCC-16AW
car battery cord can also be used to operate this
recorder on a 12 V or 24 V car battery.
12