Using the battery pack – Sony CCD-F33 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the Battery Pack

V-1

V-2

V-3

How to Prepare the Rechargeable
Battery Pack

Have sufficient battery pack power to do

2

or

3 times as much recording than you have

planned. I V-11

“Battery life” as indicated in the instruction
manual or catalogue of the recorder is measured
by the continuous recording time of the recorder,

placed at a room temperature using a full-
charged battery.

Battery life is shorter in a cold climate. I V-21
Battery efficiency is decreased and the battery

will be used up more quickly.

Turn the STANDBY switch of the recorder off
when not recording to save battery power.

El]

A smooth recording can be made even if

recording is stopped and started again. While
positioning the subject or selecting an angle, or
looking through the viewfinder lens, the lens
moves automatically and the battery is used. The

battery is also used when a tape is inserted or

removed.

V-4

When the Rechargeable Battery Pack

should be Replaced

When the ca-mark in the viewfinder changes
from slow blinking to rapid blinking while you

are recording. IV-

4

I

Turn off the power switch of the recorder and

replace the battery pack. Leave the tape in the
recorder in order to obtain a smooth recording

after the battery pack is replaced.

AA

Advertising