Sony CCD-F33 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Date and Time
To check the preset date and time
Press the DATE or TIME button in the recording
pause mode. When the same button is pressed
again, the indication goes off.
To readjust an incorrect date or time
Set the unit to date/time setting mode and press
the NEXT button repeatedly until the incorrect
digit blinks. Correct it with the -i- button and press
the NEXT button. After adjusting the minute
digits, press the NEXT button at the same time
with an announced time signal.
C-4
Recording the Date or Time
During camera recording or in recording pause
mode, press the DATE or TIME button to display
the date or time on the viewfinder screen.
The date or time being displayed will be recorded
together with the picture.
To stop recording the date or time
Press the DATE or TIME button again. The
picture recording will continue.
15