Sony STR-DE825 - Manual (Page 10)

Digital Component Hookups
X
o
o
5 ;
5*
(fi
(D
9
3
*0
o
3
(D
3
cr
Connect the digital output jacks of your MD or DAT deck
to the receiver's digital input jack and connect the digital
input jacks of your MD or DAT deck to the receiver's
digital output jack. These connections allow you to make
digital recordings of a CDs played back through your
DVD (or LD player) and DBS broadcasts. Required conte
Optical digital cords (not supplied)
Black <diL>a= ad> Black
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
White (L)
Red (R)
•Notes -
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• To make a digital recording from your CD player, connect the CD player's digital output directly to the digital input on your MD or DAT
deck. Refer to the instructions supplied with your CD player and MD or DAT deck for details.
• This unit is compatible with 32 kHz, 44.1 kHz, and 48 kHz sampling frequencies. It is not compatible with 96 kHz sampling frequencies.
• It is not possible to record analog signals to TAPE and VIDEO with only digital connections. Be sure to make both digital and analog
cormections to your digital components.
10