Getting started, Charging and installing the battery pack, Charging the battery pack – Sony CCD-TRV12 User Manual
Page 6: Charging time, Battery life, Ccd-trv12ftrv112
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting started
Charging and installing the battery pack
Before using your camcorder, you first need to charge and install the battery pack. To
charge the battery pack, use the supplied AC power adaptor.
Charging the battery pack .
Charge the battery pack on a flat place without vibration.
(
1
)
Connect the AC power adaptor to the wall outlet.
(2)
Align the right side of the battery pack with the line on the AC power adaptor,
then slide the battery pack in the direction of the arrow.
(3)
Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the
wall outlet, and then remove the battery pack and install it on the camcorder.
Charging Time
Battery pack
NP-33(supplied) NP-98/98D NP-80/80D NP-78
NP-68
NP-C65 NP-60D
Charging time*(min)
60
215
190
170
125
105
90
^Approximate minutes to charge an empty battery pack using the supplied AC power
adaptor. (Lower temperatures require a longer charging time.)
Battery life
CCD-TRV12fTRV112
Battery pack
NP-33(supplied) NP-98/98D NP-80/80D
NP-78
NP-68
NP-C65 NP-60D
While
LCD open"
65 (30)
225 (120)
195 (105) 180 (100) 140 (75) 115 (60) 100 (55)
recording" LCD close
85 (40)
300 (160)
255 (140) 230 (125) 175 (95) 155 (85) 130 (70)
While playing back on
LCD"
65
225
195
180
140
115
100