Camera recording, To stop recording momentarily [a, To finish recording [b – Sony CCD-TRV12 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera recording
Make sure that a power source and a cassette is inserted and that the START/STOP
MODE switch inside the LCD panel is set to A .
When you use the camcorder for the first time, power on it and reset the date and time
to your time (p. 33) before you start recording. The date is automatically recorded for 10
seconds affer you start recording
(AUTO DATE feature).
This feature works only once a
day.
Before you record one-time events, you may want to make a trial recording to make
sure that you are using the camcorder correctly.
(
1
)
While pressing the small green button on the POWER switch, set it to
CAMERA.
(2)
Turn STANDBY up. The "STBY" indicator appears in the viewfinder.
(3)
Press START/STOP. The camcorder starts recording and the "STBY" indicator
changes to the "REC" indicator.
You can also select Recording mode, SP (standard play) mode or LP (long play) mode.
Set REC MODE (p. 28) according to the length of your planned recording before you
start.
To stop recording momentarily [a]
Press START/STOP again. The "REC" indicator in the viewfinder changes to the
"STBY" indicator
(Standby mode).
To finish recording [b]
Press START/STOP. Turn STANDBY down, and set the POWER switch to OFF.
Then, eject the cassette and remove the battery pack.
[b]