Sony SAT-B1 - Manual (Page 41)

Changing the Default
Data Service
Selecting CANCEL returns you to the
previous screen, without saving your
selections.
Select one of the following:
To Do This... Do This...
Change the data service for the
current station only Select the data service and then
select OK.
Change the data service for all
stations Select DEFAULT (then see
"Changing the Default Data
Service" below).
Change the baud rate for the DSS
receiver's high-speed data port Select BAUD RATE (then see
"Setting the Baud Rate" below).
Call your program provider if you have questions about selecting a
data service.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
2
Select a default data service and then select OK.
DEFAULT DATA SERVICE
DATAI
✓
DATA 2 DATA3 DATA 4
DATAS DATA 6 DATA? DATAS
CANCEL
HELP
Call your program provider if you have questions about default data
services.
Setting the Baud Rate
Selecting CANCEL returns you to the
previous screen, without saving your
To set the baud rate for the DSS receiver's high-speed data port:
1
Select BAUD RATE from the Data Services screen.
2
Select a baud rate for the high-speed data port and then select OK.
SET BAUD RATE
2400 4800 9600 19200
CANCEL
HELP
Call your program provider if you have questions about setting the
baud rate.
Chapter 4: Using the System Features 43