Sony STR-V200 - Manual (Page 13)

Receiver Operations
Recording on a video tape
You can record the audio portion of TV programs or
DBS programs using the receiver. You can also add
audio from a variety of audio sources when editing a
video tape. See your VCR's instruc^on manual if you
need help.
1 Press TV/DBS.
2 Turn on the TV (and the DBS tuner).
3 Insert a blank video tape into the VCR for
recording.
4 Start recording on the VCR.
«*«
'Q* You can replace the audio while recording on a
video tape
At the point where you want to start recording from
another audio source, press another function button (for
example, CD) then start playback. The audio from that
source will be recorded onto the audio track of the
video tape, instead of the audio from the original.
To resume audio recording from the original, press the
TV/DBS button again.
Selecting a Surround Mode
You can take advantage of surround sound simply by
selecting one of the three pre-programmed surround
modes according to the type of music you want to
play.
SURROUND MODE SURROUND ON/OFF
EFFECT/
DELAY
SURROUND
ON/OFF
MODE
1 Press SURROUND ON/OFF to turn on the
surround sound.
One of the indicators lights up in the display.
2 Press SURROUND MODE repeatedly until the
indicator for the surround mode you want
appears in the display.
Select the appropriate surround mode according to
the table below.
Select To
PRO LOGIC* Decode programs processed with
Dolby Surround and create the
atmosphere of a movie theater
C.STUDIO Add the acoustic reflections of a
cinema studio to decoded Dolby
Surround signals
HALL Reproduce the acoustics of a
rectangular concert hall. Ideal for soft
acoustic sounds.
* "1X)LBY" appears in the display.
To turn off the surround mode
Press SURROUND ON/OFF.
14