Antenna hookup, 0 use this hookup if you're using, Step – Sony SLV-775HF User Manual
Page 16: Hookup 3, 18 1 antenna hookup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step
3: Hookups (continued)
Hookup 3
Pages
16
to
18 1
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
0
Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
VHF/UHF
................. A Match the type of
Qj.
connector on your
VHF TV: A, B, or C.
VCR
ti
d 3 — - - -
B
UHF
VHF
UHF
0
Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VCR
tL
-
VHF/UHF Match the type of
--H@ A connector on your
TV: A, B, or C.
VHF
■ B For connector types
B and C, no UHF
connection is
required.
VHF
UHF
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so that you can connect the cable to the VHF/UHF
IN connector. If you have separate cables for VHF and UHF antennas, you should use
a U/V band mixer (not supplied). For details, see page 71.
16
Getting Started