Sony SLV-775HF - Manual (Page 59)

o
TIMER SET / CHECK 1 1 ; 1 6 SU
... i, START STOP CH
'r/ie SU— — - - —sp
Set the date, start and stop times, channel
number and tape speed:
1 Push Joystick to ^ to flash each item in
turn.
2 Push joystick tO-^/4 to set each item.
To correct a setting, push Joystick to ^ to
return to that setting and reset.
To record the same program every day or the same day every week,
push Joystick to ♦ while the date is flashing. For details, see "Daily/
weekly recording" on this page.
To record from a source connectecJ to the LINE IN jacks, press
INPUT SELECT to display "LI" or "L2" in the "CH" position.
Push Joystick to “► to confirm the setting.
The cursor (►) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
Press the Joystick (EXECUTE).
09
01
O
■a
A
o
3
Press POWER to turn off the VCR.
The TIMER indicator on the VCR lights up and the VCR stands by
for recording. When using a cable box, leave it on.
Daily/weekly recording
In step 2 above, push Joystick to to select the recording pattern. Each time
you push Joystick to the indication changes as shown below.
the current date -► SU-SA -♦ MO-SA -► MO-FR -► EVERY SA -►..................-►
EVERY MO —► EVERY SU —► 1 month later —► (dates count down) —► the
current date
Tips
• To-set the channel, you can also use the CH- e /- or number buttons.
• To set the tape speed, you can also use TAPE SPEED.
Note
• If you are using cable box control, you cannot select "LI" or "L2".
Basic Operations 59