Sony SLV-775HF - Manual (Page 41)

To ensure correct operation
• Place the Cable Mouse so that it hangs out over the cable box/DSS
receiv'er front.
Signal flow
3O®0
3 O ® 0
3O©0
50 © O
To check the cable box control setting
1 Press CH +/- on the remote commander. Does the channel indicator on
the cable box/DSS receiver change? (Point the remote commander at
the VCR, not at the table box/DSS receiver.)
2
Press all 10 number buttons (0 to 9) on the remote commander. Does the
channel indicator on the cable bo)^/DSS receiver change?
If the answer to both 1 and 2 is "yes," you have made the correct setting.
continued
Getting Started 41