Sony SLV-778HF - Manual (Page 11)

Hookup 1: VCR setup
1 Set the RF UNIT switch to
CH 3 or CH
4 , whichever
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 78.
If you made A/V
connections (from page 8),
you can skip this step.
2 Turn on your cable box.
3 Press EASY SET UP on the VCR.
O
The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press OK. For details, see page 30.
O The CLOCK SET menu appears. Select AUTO
and press OK. For details, see page 31.
O
The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 38.
O
Enter your cable box code number and press
4'-
For details, see page 39.
► ENGLISH
ESPAÑOL
FRANÇAIS
NEXT : OK
CANCEL : EASY SET UP
SELECT
NEXT
CANCEL
</►
OK
EASY SET UP
SET UP
CABLE BOX CONTROL
►CABLE MOUSE «ON OFF
BOX CODE NO. ------
BOX OUTPUT CH CHS
SELECT : •</►
CANCEL ; EASY SET UP
SETUP
CABLE BOX CONTROL
CABLE MOUSE «CWi^OFF
►BOX CODE NO. ------------ -------- -
BOX OUTPUT CH
ENTER YOUR CABLE BOX
CODE NO USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
© Select your cable box
output channel and
press OK.
SET UP
CABLE BOX CONTROL
CABLE MOUSE -ON OFF
BOX CODE NO.
►BOX OUTPUT CH -CHS,*-
USE •</► TO SELECT CABLE
BOX CH. THEN PUSH OK
SETUP
SET UP IS DONE
Normal display
continued
Getting Started
11