Sony SLV-778HF - Manual (Page 64)

Playinglsearching at various speeds (continued)
Using the shuttle ring on the VCR
With the shuttle ring on the VCR,
you can operate a variety of
playback options. There are two
ways for using the shuttle ring,
normal mode and jog mode.
Shuttle ring
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or
counterclockwise. Each change in the shuttle ring position changes the
playback mode in the following way.
• Pause■
Slow motion
in reverse
Slow motion
/
Normal speed
in reverse
/
Double speed
in reverse
High speed
in reverse
\
Normal speed
(Initial speed)
\
Double speed
1
High speed
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal playback, press JOG again. The JOG indicator goes off.
64 Additional Operations