Uick reference to using the vcr, To play a tape, To record a program – Sony SLV-778HF User Manual
Page 88: To watch tv, Hookup 1, Hookup 2, Hookup 3, Hookup 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q
uick reference to using the VCR
Hookup 1
To play a tape
1
Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2
Insert a tape and press
t> PLAY.
To record a program
1
Turn on the cable box.
2
Press VCR Plus+ on the
remote commander.
3
Enter the program's
PlusCode number.
4
Select ONCE, DAILY, or
WEEKLY, then press SET.
5
Insert a tape.
6
Press POWER to turn off
the VCR.
7
Leave the cable box on.
To watch TV
1
Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator'in the
display window goes off.
2
Turn on your cable box.
3
Set the TV to the cable box
output channel (usually 2,
3, or 4).
4
Set the cable box to the
channel you want to
watch.
2
Insert a tape and press
O PLAY
To record a program
1
Press VCR Plus+ on the
remote commander.
2
Enter the program's
PlusCode number.
3
Select ONCE, DAILY, or
WEEKLY then press SET.
4
Insert a tape.
5
Press POWER to turn off
the VCR.
To watch TV
1
Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display window goes off.
2
Select the channel with
your cable box (if you have
one) or with your TV.
Hookup 2
To play a tape
1
If you made A/V
connections, set the TV to
video input.
If you didn't use A / V
hookup:
• Turn on the cable box.
• Set the cable box to
channel 3 or 4.
• Set the TV to the output
channel of the cable box
(usually 2, 3, or 4).
If you have any questions about
1-800-222-SONY (7669) or write
#T1-11, Park Ridge, NJ 07656
Hookup 3
To play a tape
1
Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2
Insert a tape and press
PLAY. If there's no
picture on your TV, press
the VCR's TV/VIDEO
button until the VIDEO
indicator comes on in the
display window.
To record a program
1
Press VCR Plus+ on the
remote commander.
2
Enter the program's
PlusCode number.
3
Select ONCE, DAILY, or
WEEKLY then press SET.
4
Insert a tape.
5
Press POWER to turn off
the VCR.
To watch TV
1
Turn off the VCR, or press
the VCR's TV/VIDEO
button until the VIDEO
indicator in the display
window goes off.
2
Set the TV to the channel
you want to watch.
Hookup 4
To play a tape
1
Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2
Insert a tape and press
O PLAY.
To record a program
1
Turn on the cable box.
2
Set the cable box to the
channel you want to
record.
3
Press VCR Plus+ on the
remote commander.
4
Enter the program's
PlusCode number.
5
Select ONCE, DAILY, or
WEEKLY, then press SET.
6
Insert a tape.
7
Press POWER to turn off
the VCR.
8
Leave the cable box on.
To watch TV
1
Turn off your VCR, or
press the VCR's TV /
VIDEO button until the
VIDEO indicator in the
display window goes off.
2
Turn on your cable box.
3
Set the TV to the cable box
output channel (usually 2,
3, or 4).
4
Set the cable box to the
channel you want to
watch.
this product, you may call:
Sony Customer Information Center
to:
Sony Customer Information Center
Sony Drive, Mail Drop
Sony Corporation Printed in Malaysia