Sony STR-DE915 - Manual (Page 18)

Receiver Operations
Recording on a video tape
You can record from a VCR, a TV, or an LD player
using the receiver. You can also add audio from a
variety of audio sources when editing a video tape. See
your VCR or LD player's instruction manual if you
need help.
1 Select the program source to be recorded.
2 Set the component to be ready for playing.
For example, insert the laser disc you want to
record from into the LD player.
3 Insert a blank video tape into the VCR (VIDEO 1
or VIDEO 2) for recording.
4 Start recording on the recording VCR and then
start playing the video tape or laser disc you want
to record.
You can record sound from a different audio source
onto a video tape while copying from a video tape
or laser disc
Locate the point where you want to start recording from
another audio source, select the program source, then
start playback. The audio from that source will be
.recorded onto the audio track of the video tape instead
of the audio from the original.
To resume audio recording from the original, select the
video source again.
Note
You cannot record audio from a program source connected
to the LD/DVD IN AC-3 RF/OPTICAL or LD/DVD jack
(STR-DE915 only) or 5.1 INPUT jacks (STR-DE715/DE615/
D660Z/D560Zonly).
Using the Sleep Timer ll
You can set the receiver to turn off automatically at a
time you specify.
SLEEP •
sssgca
rascaras
‘Шф ® ф&
® ® ® ®
^jatscfiíE)
s
sasafto
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
. 2:00:00 — 1:30:00-» 1:00:00 0:30:00 -► OFF - |—» 2:00:0
The display dims after you specify the time.
Note
On the STR-DE615 and D560Z, appears instead of
Q' You can freely specify the time
Press SLEEP first, then specify die time you want using
the digital processing control buttons ( A or V )• The
sleep time changes in 1 minute intervals. You can
specify up to 5 hours.
You can check the time remaining before the
receiver turns off
Press SLEEP. The remaining time appears in the
display.
18