No input signal, Step 2: connect the power cord, Step 4: if necessary – Sony CPD-101VS User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ step 2: Connect the power cord
With the display switched off, connect the power cord to the display
and the other end to a power outlet.
to a power outlet
Power cord (supplied)
■ Step 3: Turn on the display, and then your
computer.
For proper Plug and Play recognition, turn on the display before you
turn on your computer.
%/
Note on Warning Messages
If there is something wrong with the input signal, one of the following messages appears.
"OUT OF SCAN RANGE"
This indicates that the input signal is not supported by the display's specifications.
"NO INPUT SIGNAL"
This indicates that video signal is missing.
To solve these problems, see "Troubleshooting" on page 37.
■ Step 4: If necessary...
Adjust the user controls according to yotir personal preference.
The installation of your display is complete. Enjoy your display.
Getting Started
13