Sony SCT-ID10 - Manual (Page 4)

INFORMATION FOR
GENERAL
TELEPHONES
(1) This equipment complies with Part 68 of the
FCC rules.
On the bottom of this equipment is a label
that contains, among other information, the
FCC registration number and ringer
equivalence number(REN) for this
equipment. If requested, this information
must be provided to the telephone
company.
(2) The applicable registration jack{connecter)
USOC-RJllC is used for this equipment.
(3) This equipment is designed to be connected
to the telephone network or premises wiring
using a compatible modular jack which is
Part 68 compliant. The FCC compliant
telephone cord and modular plug is
provided with this equipment.
(4) The REN is used to determine the quantity
of devices which may be connected to the
telephone line. Excessive RENs on the
telephone line may result in the devices
not ringing in response to an incoming call.
In most, but not all areas, the sum of the
RENs should not exceed five(5.0). To be
certain of the number of devices that may be
cotmected to a line, as determined by the
total RENs, contact the local telephone
company.
(5) If your equipment (SCT-IDIO) causes harm
to the telephone network, the telephone
company will notify you in advance that
temporary discontinuance of service may be
required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
advised of your right to file a complaint
with the FCC if you believe iLis necessary.
(6) The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the telephone
company will provide advance notice in
order for you to make necessary
modifications to maintain uninterrupted
, service.
(7) If trouble is experienced with this
equipment (SCT-IDIO), for repair or
warranty information, please contact Sony
Direct Response Center Tel 1-800-222-7669.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
(8) All repairs will be performed in an
authorized Sony service station.
(9) This equipment cannot be used to party
lines or coin lines.
(10) This equipment is hearing aid compatible.
If your telephone is equipped with automatic
dialers.
When programming emergency numbers
and(or) making test calls to emergency numbers:
1. Remain on the line and briefly’explain to the
dispatcher the reason for the call.
2. Perform such activities in the off-peak hours,
such as early morning or late evenings.
For the customers in Canada
- CAUTION :---------------
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Industry Canada NOTICE
The Industry Canada label identifies certified
equipment.
This certification means that the equipment
meets certain telecommunications network
protective, operational and safety requirements
as prescribed in the appropriate Terminal
Equipment Technical Requirements
document(s). The Department does not
guarantee the equipment will operate to the
user's satisfaction.
Before installing this equipment, users should
ensure that it is permissible to be connected to
the facilities of the local telecommunications
company. The equipment must also be installed
using an acceptable method of connection. The
customer should be aware that compliance with
the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be
coordinated by
a representative designated by
the supplier. Any repairs or alterations made by
the user to this equipment, or equipment
malfunctions, may give the telecommunications
company cause to request the user to discormect
the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines and internal metallic
water pipe system, if present, are connected
together.
This precaution may be particularly important in
rural areas.
Caution: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or
electrician, as appropriate.
"NOTICE; The Ringer Equivalence Number
(REN) assigned to each terminal device provides
an indication of the maximum number of
terminal allowed to be connected to a telephone
interface. The termination on an interface may
consist of any combination of devices subject
only to the requirement that the sum of the
Ringer Equivalence Number of all the devices
does not exceed 5."
IMPORTANT INSTRUCTIONS TO USERS
• Your model SCT-IDIO has been approved by
the Industry Canada.
• The Ringer Equivalence Number (RBN) of your
model is 0.7.
Operation is subject to the following two
conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.