Installing the battery, Setting the clock, Playing the radio – Sony SCT-ID10 User Manual

Page 6: Setting the alarm, Setting the sleep timer, Clock radio operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installing the
Battery

To keep gixxi t\me, \our unit needs one S'(,H)oP
battery (ni>t supplied), iii additioii to house

current. The batlerv ktvps the cliKk operating in
the event ot a power interruption. Betöre setting
the time on \ our unit, open the lid at the bottom
of tile unit, install tlie batters' with correct

polarité and then close the lid.

• After a power interruption, the displayed time

may not be always correct (it may gain or lose

about U) minutes per hour).

Knowing when to replace the
battery

• To check battery power, unplug the power

cord from the wall outlet and plug it in again
after a few minutes, if the displayed time is

incorrect, replace the battery with a new one.

^Clock Radio Operation

Setting the Clock

Setting the time
1

Plug in the unit.

The display will flash "AM 12:00".

2

While holding down

CLOCK,

press

TIME SET

+ or - until the correct time

appears in the display.
When you release

CLOCK,

the clock

begins to operate.

• To set the current time rapidly, keep pressing

the + or - button while holding down CLOCK.

Setting the Date

1

While holding down

SNOOZE/DATE/

SLEEP OFF,

press

TIME SET

+ or -

until the correct date appears in the
display. Then, release

SNOOZE/DATE/

SLEEP OFF

• To display the date, press SNOOZE/DATE/

SLEEP OFF. The display returns to the current
time when you release SNOOZE/DATE/SLEEP
OFF.

Playing the Radio

1

Press

RADIO ON/SLEEP.

2

Select

FM

or

AM

using

BAND.

3

Tune in a station using

TUNING.

4

Adjust volume using

VOL.

• To turn off the radio, press RADIO OFF/

ALARM RESET/OFF.

time

OFF

Ì vou roloaso

SNOOZt/OATE/SLbtP

If you answer a call or wish to place a call
while your clock radio is playing, the radio
automatically "mutes"(stops playing).
(See Making Calls in detail.)

• To improv-e radio reception

FM: Since the antenna isfencased in the AC

power cord, extend the cord to improve
FM reception.

AM: Rotate the unit horizontally for optimum

reception. A ferrite bar antenna is built
into the unit.

Setting the Alarm

To set the r.rdio ui.rrm. first tune in a st.rtion and
adjust tile l olunie

1

While holding down

ALARM A

RADIO

(for the radio) or

B BUZZER

(for the bu/zer), pre.ss

TIME SET +

or -

until the desired time appears in the
display.

When

vou release

ALARM A

or

B,

the

ALARM A

iir

B

indic

ator

Playing the Radio

1

Press

RADIO ON/SLEEP

2

Select

FM

or

AM

using

BAND

3

Tune in a station using

TUNING.

4

Adjust volume using

VOL.

• To turn off the radio, press RADIO OFF/

ALAgM RESET/OFF.

It vou answer a call or wish to place a call
while your clock radio is playing, the radio
automatically "mutes"(stops playing).
(See Making Calls in detail.)

• To improve radio reception

FM: Since the antenna is tncased in the AC

power cord, extend the cord to improve

FM reception.

AM; Rotate the unit horizontally for optimum

reception. A ferrite bar antenna is built
into the unit.

Setting the Alarm

To set the radio alarm, first tune in a station and
adjust the volume.

1

While holding down

ALARM A

RADIO

(for the radio) or

B BUZZER

(for the buzzer), press

TIME SET

+ or -

until the desired time appears in the
display. When you release

ALARM A

or

B,

the

ALARM A

or

B

indicator

stops flashing and lights up, and the

current time appears in the display.
The alarm will come on at the preset

time and automatically turn itself off
after 59 minutes.

• If you set ALARM A and ALARM B at the same

desired time, only ALARM A will work.

• To shut off the alarm, press RADIO OFF/

ALARM RESET/OFF.

'The alarm will come on at the preset time the

next day.

• To cancel either alarm, while holding down the

ALARM A or ALARM B button, press RADIO
OFF/ALARM RESET/OFF.

• To adjust the radio alarm volume, turn VOL

(volume).

• To check the preset time, press ALARM A or B

To doze a few more minutes

1

Press

SNOOZE/DATE/SLEEP OFF.

The alarm will shut off, but will come
on again after about 6 minutes. You cai

repeat this process as many times as
you like.

To use both sleep timer and alarm
function

You can tall asleep to the radio sound and you
will be awakened by the radio alarm at the pres
time.

1

Set the alarm. (See "Setting the Alarm'

2

Set the sleep timer. (See "Setting the

Sleep Timer")

Setting the Sleep

Timer

Enjoy falling asleep to the radio using the built-in
sleep timer that shuts off the radio automatically
at a preset time.

1

Press

RADIO ON/SLEEP.

The radio turns on. It will go off after

the preset time has passed. You can set

the sleep timer of 90,60,45,30 or 15

minutes.
Every push changes the display as

follows.

Current time—»On—► 90 —► 60—i

^-------15

30

45 «-1

The radio will play for the time you set,

then shut off.

• To turn off the radio before the preset time,

press SNOOZE/DATE/SLEEP OFF.

Advertising