Searching using the index function, Not available on slv-se220d) – Sony SLV-SE220D User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching using the index function
(not available on SLV-SE220D)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
To find a specific recording by scanning (Index scan)
^ Insert an indexed tape into the VCR.
2 Press ^M/^W (index search). The
VCR starts scanning each recording for
five seconds in the corresponding
direction.
2 Press (play) to start playback when you find the desired point.
To search a specific recording (Index search)
^ Insert an indexed tape into the VCR.
2 Press ^M/^W (index search) twice.
• To search ahead, press (index
search) twice.
• To search backwards, press (index
search) twice.
2 Press ^M/^W (index search) depending on the direction where your
desired programme is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
^ The VCR starts searching, and playback starts automatically from that
point.
To stop searching
Press ■ (stop).
64 Searching using the index function (not avaiiabie on SLV-SE220D)