Sony SLV-SE220D - Manual (Page 78)

Specifications
System
Channel coverage
PAL (B/G)
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATVS01toS05,S1to S20
HYPER S21 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL 23.39 mm/s (recording/
playback)
NTSC 33.35 mm/s (playback only)
LP: PAL 11.70 mm/s (recording/
playback)*
NTSC 16.67 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)*
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min. (with E180 tape)
* not available on SLV-SE220D
Inputs and outputs
LINE-1 (EURO AV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2 (DEC/EXT)/LINE-3 (DEC/EXT)* 1
21-pin
Video input: pin 20
Audio input: pins 2 and 6
t LINE-2 L O R* 2
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phonojack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO (OUT/SORTIE) R/D L/G* 3
Phonojack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
* 1 not available on SLV-SE620D
* 2 SLV-SE820D/E only
* 3 not available on SLV-SE620D/E and
SE220D
General
Power requirements
220 - 240 V AC, 50 Hz
Power consumption
15 W (SLV-SE220D)
17 W (SLV-SE820D/E, SE727E,
SX727D, SE720D/E, SX720D/E and
SE620D/E)
3 W (POWER SAVE is set to ON,
minimum)
Operating temperature
5°C to 40°C
Storage temperature
-20°C to 60°C
Dimensions including projecting parts and
controls (w/h/d)
Approx. 360 x 95 x 243 mm
(SLV-SE220D)
Approx. 430 x 96 x 242 mm
(SLV-SE727E, SX727D, SE720D/E,
SX720D/E and SE620D/E)
Approx. 430 x 96 x 251 mm
(SLV-SE820D/E)
Mass
Approx. 2.8 kg (SLV-SE220D)
Approx. 3.1 kg (SLV-SE820D/E,
SE727E, SX727D, SE720D/E,
SX720D/E and SE620D/E)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to
change without notice.
78 Specifications