Dismounting the unit, Warning, The rotary commander labels – Sony FM/AM CASSETTE CAR STEREO XR-C5100 User Manual
Page 12: Dismounting the unit the rotary commander labels, Maintenance dismounting the unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance
Dismounting the unit
Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the
power connection and replace the fuse. If the
fuse blows again after replacement, there may
be an internal malfunction. In such a case,
consult your nearest Sony dealer.
■ Fuse(10 A)
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing (
RELEASE),
then detach it and clean the connectors with a
cotton swab dipped in alcohol. Do not apply
too much force. Otherwise, the connectors may
be damaged.
Back of the front panel
Release key (supplied)
The rotary commander
labels
You can control this unit with the optional
rotary commander (RM-X4S).
Some labels are supplied with the rotary
commander. Attach that label that matches the
functions of the master unit and the mounting
position of the rotary commander.
When you mount the rotary commander,
attach the appropriate label, as in the
illustration below.
12