Sony FM/AM CASSETTE CAR STEREO XR-C5100 - Manual (Page 9)

Digitai D-BASS Analog D-BASS
With Optional Equipment
MD/CD Unit (XR-C5100 only)
You can control two MD or CD units with this
unit.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
"D-BASS"* appears in the display.
To cancel, turn the control to the OFF position.
Note
If the bass sound hecomes distorted, adjust the D-BASS
control or the volume button.
* If an optional CD changer has the Digital D-BASS
function, ‘'DIGITAL D-BASS" appears on the display
during CD playback (XR-C5100 only).
Attenuating the beep tone
Press ® while pressing C sel ).
To obtain the beep tone again, press these
buttons again.
Note
If you connect an optional power amplifier to the LINE
OUT and do not use the built-in amplifier, the beep tone
will be disabled.
Playing an MD/CD
Press (SOURCE') until the desired unit
indication appears on the display.
MD/CD playback starts.
When an MD/CD unit is connected, all the
tracks play from the beginning.
Note
Even if you select an MD unit, "CD" appears in the
display.
Selecting MD/CD units (when
several MD/CD units are connected)
Press ( MODE) repeatedly to select the desired
MD/CD unit.
Changing the displayed items
Each time you press ( DSPL) during MD/CD
playback, the item changes as follows:
Elapsed playback time
I
Disc and track number
Clock
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip.
To locate the succeeding tracks
To locate the preceding tracks
■¡¡g
33
Q>
Q.
o'
Ò
D"
(D
TI
C
D
a
o
D
SCL
O
n
a
c
D