Sony TA-AV571 - Manual (Page 9)

Amplifier Operations
Using the remote d]
The remote lets you operate the amplifier and the Sony
components that are connected to it.
FUNCTION
(VIDEO 1/2,
TAPE, CD
TUNER)
OOQ
I Q Q Q Q ^
O O Q C D O
© 0 © © ©
o o o © © ■
SYSTEM
POWER
1 Press SYSTEM POWER to turn on the amplifier.
2 Press one of the FUNCTION buttons to select the
component you want to use:
To listen to Press
Raciio program s TUNER
Audio tapes TAPE
Com pact discs (CD) CD
Video tapes VIDEOl
Laser discs (or TV game) VIDE02
If the component does not turn on
Press the power switch on the com ponent.
3 Start playing.
See "Remote Button Descriptions" on page 19 for
details.
To turn off the components
Press SYSTEM POW ER. You can turn off audio components
connected to the SW ITCHED AC OUTLETS on the back of *
the amplifier at the same time.
Recording
This amplifier makes it easy to record to and from the
components connected to the amplifier. You don’t have
to connect playback and recording components
directly: once you select a program source on the
amplifier, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you've connected all
components properly.
Function buttons
CD CZl
a cmc3(—! ( I I (—«—w—im
°o
0 i' III I • I
cr~3-----------
I
—I—•
I
Playback component
(program source)
Recording component
(tape deck, VCR)
Audio signai fiow
Recording on an audio tape or video tape
You can record on an audio tape or video tape using
the amplifier. Refer to the instruction manual for the
tape deck or VCR if you need help.
1 Press one of the function buttons to select the
component to be recorded.
2 Set the component to be ready for playing.
For example, insert a CD into the CD player.
3 Insert a blank tape into the recording deck and
adjust the recording level, if necessary.
4 Start recording on the recording deck and then
start playing the component.