Sony CFS-W338 - Manual

CFS-W338
^996 by Sony Oofporation
Pnnted In China
3-856-628-71(1)
WARNING
To prevent fire or shock hazard, do not
expose the player to rain or moisture.
A
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVIQN6TOOUAUFIED SERVICE PERSONNEL.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
For customers in Canada
To prevent electric shock, match wide blade of plug
to wide slot, fully insert.
Owner's Record
The model number is located on the bottom, and
the serial number is located in the battery
compartment. Record the serial number in the
space provided below. Refer to them whenever
you call upon your Sony dealer regarding this
product.
Model No. CFS-W338 Serial No._________________
Precautions
On safety/power sources
• Should any solid object or liquid fall into the player,
unplug the player, and have it checked by qualified
personnel before operating it any further.
• For AC operation, use the supplied AC power cord;
do not use any other type.
• The player is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if the player itself has been turned off.
• For battery operation, use six size D (R20) batteries.
• When the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage
or corrosion.
• The nameplate indicating operating voltage, power
consumption, etc. is located on the bottom.
On placement/operation
• Do not leave the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
• Do not place anything within 10 mm of the side of the
cabinet. The ventilation holes must be unobstructed
for the player to operate properly and to prolong the
life of its components.
• Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or
spring-wound watches away from the player to
prevent possible damage from the magnet.
• If the player has not been used for a long time, set it
in the playback mode to warm it up for a few minutes
before inserting a cassette
If you have questions or problems concerning your
player, please consult your nearest Sony dealer.
Troubleshooting Specifications
There is no audio.
• Connect the AC power cord
securely.
• Insert the batteries properly.
• Replace all the batteries if they
are weak.
• Unplug the headphones.
• Adjust the volume.
• Set FUNCTION to the position
you want to operate.
Cassette cannot be
inserted.
Insert the cassette properlv.
The • REC button does
not function.
• No cassette is in deck B.
• Make sure the safety tab on the
cassette is in place.
Poor playback,
recording or erasing
quality.
• Dirty heads. Clean the unit (as
shown) with a cotton swab
slightly moistened with
cleaning fluid or alcohol.
• Demagnetize the heads and all
metal parts in the tape path
w'ith a commercialh' a\ aiiable
tape head demagnetiYer.
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 3-2ohm loads, both
channels driven, from 150-
10,OOOHz; rated 1.5 watts per
channel minimum RMS power,
with no more than 10% total
harmonic distortion in AC
operation.
« Frequency range
FM; 87.6-108MHZ
AM: 530-l,710kHz
• Antennas FM; Telescope/.^M;
Built-in ferrite bar
• Recording system 4-track, 2-
channel stereo
• Frequency response 80-10,(X)0Hz
• Speakers Fullrange; lOcm
(4inches) dia., cone type
• Output Headphones jack(stereo
minijack), for 16-32 ohms
impedance headphones
• Power output (excluding the
USA model)
2.3W-
f 2.3W (at 10% harmonic
distortion in IXl operation)
• Battery life
FM Recording: Sony R20P;
Approx. 12 hours/Sony LR20
alkaline: Approx. 24 hours
Playback; R20P; Approx. 7
hours/Sony LR20 alkaline:
Approx. 12 hours
• Power requirements
Australian model; 230-240 V AC,
SOHz/Other models: 120 V' AC,
60Hz
9V DC, six size D (R20) batteries
• Power consumption
AC 14W
• Dimensions Approx. 540 x 159 x
163 mm (w/h/d) ( 21% x 6% x 6’/2
inches) incl. projecting parts and
controls, not incl. handle
• Mass Approx. 3.5kg (7 lb 11 oz)
incl. batteries
• Supplied accessory
AC power cord (1)
Design and specifications are
subject to change without notice.