Canon PowerShot A495 - Manual (Page 60)

60
Shooting in Program AE
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
1
Enter G mode (p. 40) .
● After pressing the button, press the qr
buttons to choose G, then press the m
button.
2
Adjust the settings according to
your purposes
(pp. 60 – 68) .
3
Shoot.
Adjusting the Brightness (Exposure
Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of –2 to +2.
1
Enter Exposure Compensation
mode.
● Press the o button.
2
Adjust the brightness.
● While watching the screen, press the qr
buttons to adjust the brightness and press
the
m button.
 The exposure compensation amount will
appear on the screen.
What if the shutter speed and aperture value appear in
orange?
If a correct exposure cannot be obtained when pressing the shutter
button halfway, the shutter speed and aperture value are shown in
orange. Try the following settings to obtain the correct exposure.
• Turn on the flash (p. 61)
• Choose a higher ISO speed (p. 64)