Specifications, Video signal, Picture performance – Sony PVM-1341 User Manual

Page 13: Inputs, Outputs, General

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Specifications

Video signal

Frequency response

Line input: More than 7 MFIz (-3 dB)

Y/C input: More than 8 MFIz (-3 dB)
Component (Y/R-Y/B-Y): More than 8 MFIz

(-3 dB)

R.G.B. (analog): More than 9 MFIz (-3 dB)

Chrominance subcarrier attenuation

3.58 MHz: Less than -30 dB (comb filter)

4.43 MHz: Less than -36 dB (trap filter)

Band pass

3.58 MHz: 2 MHz equiband

4.43 MHz: 2 MHz equiband

Chrominance/luminance

Time error

Composite: Less than ±100 nS

Y/C: Less than ±50 nS
Component: Less than ±50 nS

Aperture correction

-4.5 to ±6.5dB(at 4.5 MHz)

Synchronization AFC time constant: 1 msec

Line puli range

Horizontal: ±500 Hz

Vertical: 8 Hz

Picture performance

Normal scan

7% overscan of CRT effective screen area

Linder scan 3% underscan of CRT effective screen area

H. lineality

Less than 6%

V. lineality

Less than 6%

Convergence

Central area: 0.6 mm (Typical)

Peripheral area: 0.8 mm (Typical)

Raster size stability

H: 1.0%, V: 1.5%

High voltage regulation

3%

Audio output

0.6 W (Max.)

CRT

PVM-1344Q/PVM-1342Q:

SM PTE-C (American-standard-phosphor)

PVM-1341/PVM-1340: P-22

Chromacity coordinates (SMPTE-C only)

X

Y

Red

0.630

0.340

Green

0.310

0.595

Blue

0.155

0.070

(tolerance ±0.01)

Color temperature

6,500 K/9,300 K (±8MPCD), selectable

AC regulation range

110- 130 VAC. 50/60 Hz

Power consumption

Approx. 99 W

Inputs

For all models

VIDEO IN: BNC connector

AUlO IN: phono jack

VTR: 8-pin connector (See “VTR connector” on page 14.)

Y/C-INPUT

VIDEO: 4-pin connector (See “Y/C-INPUT connector" on

page 15.)

AUDIO: phono jack

PVM-1344Q only

EXT SYNC: BNC connector

composite sync 1-4 Vp-p, negative, 75 ohms terminated

automatically with no cable connected to the output connector

ANALOG RGB/COMPONENT: BNC connector

R, G, B and Y channels: 0.7 Vp-p. ±6 dB, non composite

R-Y and B-Y channels: 0.7 Vp-fi, ±6 dB

(Standard color bar signal of 75-percent chrominance)

When the composite signal is fed to the G or Y channels, the

monitor can be activated in the internal sync mode.

75 ohms terminated automatically with no cable connected to

the output connector

CTRL S: Minijack

PVM-1342Q/PVM-1341 only

EXT SYNC: BNC connector

composite sync 1-4 Vp-p, negative, 75 ohms terminated

automatically with no cable connected to the output

connector

ANALOG RGB: BNC connector

0.7 Vp-p, ±6 dB, non composite

75 ohms terminated automatically with no cable connected to

the output connector

DIGITAL RGB: 9-pin connector (See “DIGITAL RGB connector” on

page 14.)

CTRL S: Minijack

PVM-1340

t6 dB, non composite

ANALOG RGB: 0.7 Vp-p,

75 ohms terminated

Outputs

For all models

VIDEO OUT: BNC connector. Loop-through

AUDIO OUT: Phono jack. Loop-through

PVM-1344Q only

EXT SYNC: BNC connector. Loop-through

ANALOG RGB/COMPONENT: BNC connector. Loop-through

CTRL S: Minijack, Loop-through

PVM-1342Q/PVM-1341 only

EXT SYNC: BNC connector. Loop-through
ANALOG RGB: BNC connector. Loop-through

CTRL S: Minijack, Loop-through

General

storage temperature range

-10°C to 40°C (14°F to 104°F)

Operating temperature range

0°Cto35°C(32°Fto 95°F)

Humidity

0-90%

Dimensions Approx. 346 x 340 x 412 mm (w/h/d)

(13%x i3i/;x I6V-, inches)

Weight

Approx. 16.5 kg (36 lb 6 oz)

13

Advertising
This manual is related to the following products: