Sony PVM-1341 - Manual (Page 8)

Location and Function of Parts and Controls
BRIGHT (brightness) control
CHROMA control
PHASE control
CONTRAST control
VOL (volume) control
POWER s\witch and indicator
INPUT select buttons
BLUE ONLY button
(H APERTURE control
Turn toward + for more sharpness or toward - for less.
m BRIGHT (brightness) control
Turn toward + for more brightness or toward - for less.
Normally set this control at the center detent position.
[21] CHROMA control
Turn toward + for more color intensity or toward - for
less.
[22] PHASE control
Turn toward GRN (green) to make the skin tones greenish
or toward PUR (purple) to make them purplish.
The APERTURE, CHROMA, PHASE control settings have no
effect on the pictures input through the ANALOG RGB IN
connector.
(23] CONTRAST control
Turn toward + to make the contrast, color intensity and
brightness stronger or toward - to make them weaker.
[24] VOL (volume) control
Turn toward + for more volume or toward - for less.
[2II POWER switch and indicator
Same as[l5.
[26] INPUT select buttons
Press to select the program to be monitored.
A; for a signal fed through the LINE A connectors.
B: for a signal fed through the LINE B connectors.
Y/C/VTR: for a signal fed through the Y/C-INPUT
connectors or VTR connector.
When both the Y/C-INPUT and VTR connectors are
connected to video equipment, the input signal fed
through the Y/C-INPUT connector has priority over the
one fed through the VTR connector.
ANALOG RGB: for a signal fed through the ANALOG
RGB input connectors.
[27] BLUE ONLY button
Same as [15].
8