Starting the dv software (macintosh) – Sony DVBK-2000 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
starting the DV
software (Macintosh)
when you finish installing the DV software and
connecting DV equipment, start the DV software.
1 Double-click "DVCap" icon.
The DV software is activated and the user
registration display appears.
Clicking "DVCap" icon and clicking "Open" from
the "File" menu bring up the same display.
Please input your name, organization and the serial
number of the hardiuare.
Nome:
Organization:
Serial Number:
CO
2
Enter your name, organization and serial number
then click "OK".
You need to enter your name, organization and
serial number only when you start the software foi
the first time. The five-digit serial number is the
number written down before installing the capture
board.
The DV software is activated and the initial
display appears.
Refer to page 23 about information on each display
Refer to page 35 to 44 about information on basic
operations.
22