Capturing the image, Capturing an image from the dv equipment, Setting automatic capturing – Sony DVBK-2000 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Capturing the Image
You can capture the
image by double clicking
the preview window.
You can also capture the
image by pressing "0" in
the 10 key pad. vilien you
use "0" key, you have to
change the software
setting.
See page 34 for details.
Capturing an image from the DV
equipment
You can capture an image from the DV equipment
and save it to the disk as DV format image.
1 Make sure the DV equipment is ready to play..
2
Open an existing album or library, or create a new
one.
3
Play the tape using the VCR control window.
4
When you find your favorite image in the preview
window, click "CAPTURE."
The image that displayed in the preview window
when you clicked "CAPTURE" will be captured
into the album or library.
Capturing images from the DV
equipment automatically
If you want to set the DV software to start capturing
automatically, click "AUTO" instead of "CAPTURE"
in the above procedure so that "AUTO " lights in red.
When you click "AUTO" once again, or the specified
number of images are captured, the automatic
capturing will be terminated.
Setting automatic capturing
You can customize some capturing settings such as the
capturing condition, the maximum number or the
interval of the capturing.
1
Select "Preferences" from the "File" menu.
The Preferences dialog appears.
2
Select "Capture" page.
3
Modify any settings.