Sony KV-27XBR65 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting VCRs/video (fisc players not equipped with an S video output jack
KV-32XBR15/27XBR15
Preparations
Operation
Turn on the TV.
Press the TVA^IDEO button on the TV or an input
select button on the Remote Commander so that
the “VIDEO 1”, “VIDEO 2" or “VIDEO 3”
Indication appears on the screen.
VIDEO 1: for equipment connected to VIDEO 1 IN
VIDEO 2: for equipment connected to VIDEO 2 IN
VIDEO 3: for equipment connected to VIDEO 3 IN
You can label each of these input modes. For
details, see page 40.
For operation, refer to the instruction manual furnished
with the VCR.
When using an infrared remote control VCR made by
Sony or other manufacturer, the VCR can be operated
with the supplied Remote Commander.
See “Using the Programmable Remote Commander”
on page 44.
To return to the TV nwde
—Press the TV/VIDEO button on the TV so that a
channel number appears on the screen.
—Press the TV button on the Remote Commander.
To view one TV program while recording another
Press the TV/VTR mode select button on the VCR or Remote
(k>mmander so that the VCR will be in the TV mode. Press
the TV button on the Remote Commander, and select the
channel you want to view.
When you cannot obtain a clear picture and/or sound
Make sure that the TV/VTR mode select button on the VCR is
set to TV. Re-select the desired channel with the buttons on
the TV or the Remote Commander.
15