Preparing the remote commander – Sony KV-27XBR65 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing the Remote Commander
Battery Installation
The Mini Commander is suppiied oniy for KV-27XBR50
and KV-32XBR50.
1
Push to open the iid.
2
instaii two size AA (RQ batteries with the
correct poiarity.
3
Repiace the iid.
In normal operation, batteries will last up to half a year.
If the unit does not operate properly, the batteries might be
exhausted. Repiace ail of them with new ones.
To avoid damage from possible battery leakage, remove the
batteries when the Remote Commander will not be used for
a long time.
Mini Commander RM-K1T
MUTING button
VOLUME
+/
buttons
DISPLAY button
POWER button
CHANNEL +/-
buttons
SLEEP button
TV/VIDEO button
This Mini Commander has the minimum function buttons
for watching the TV.
Before use
The initial battery is
installed at the factory.
Remove the transparent
Insulating slip before
operation.
How to replace the battery
1
Pull out the battery case.
2 Insert a Sony CR202S
battery with the flat
surface (positive side)
upward.
Use of a battery other than
the Sony CR202S lithium
battery may create a risk of
fire or explosion.
Notes on the lithium battery
• Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately consult a
doctor.
• Be sure to observe the correct polarity when installing the
battery.
• Do not hold the battery with metallic tweezers, otherwise a
short-circuit may occur.
• Replace the battery with a Sony CR2025 lithium battery. Use
of another battery may present a risk of fire or explosion.
WARNING
Battery may explode if mistreated. Do not recharge,
disassemble or dispose of it in fire.