Setting up the tv automatically, To perform auto setup again – Sony KV-27V66 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Remote Control and Basic Functions
Setting Up the TV Automatically
After you have finished connecting your TV, you will want to run AUTO
PROGRAM to set up your channels.
POWER
1
Press to turn on the TV, the initial setup screen appears.
(U.S. models only)
(Canadian models only)
ENGLISH:
[CH+]
ESPAÑOL;
[CH-]
AUTO SET UP:[VOL+]
DEMO:
[VOL-]
MENU
[TVA/IDEO]
First please
cable/antenna
connect
Press [SET UP] to exit
ENGLISH:
[CH+]
ESPAÑOL:
[CH-]
FRANÇAIS:
[VOL+]
AUTO SET UP;[VOL-]
DEMO:
[TV/VIDEO]
First
please
cable/antenna
connect
Press [SET UP] to exit
2
Make your language selection, the menus will change to reflect your
choice.
3
Follow the on-screen instructions to continue AUTO SET UP or for a
DEMO of the menus.
For U.S. models only
4
Press to operate the on-screen menus without the use of a
remote control. Follow the on-screen instructions to make
adjustments to your TV settings.
To perform AUTO SETUP again
□ Press the button on the front panel of the TV.
To reset your TV to factory settings, turn the TV on. Then, while pressing the
button on the remote control, press POWER on the TV. The TV will turn
itself off, then back c5h, the original settings will be restored.
15