Troubleshooting – Sony KV-27V66 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
User Guide
Troubleshooting
If you are having a problem with your TV, try the suggestions below. If
the problem persists, contact your nearest Sony dealer.
Cannot operate
single tuner
PIP (KV-27S46)
No picture, no
sound
Poor or no
picture, good
sound
Good picture,
no sound
No color
Only snow
appears on the
screen
□
Make sure the VCR is connected correctly (see page 4).
□
Check to see if the VCR is on.
□
Make sure your remote control is programmed to
operate your VCR (see page 31).
□
Make sure the power cord is plugged in.
□
If a red light is flashing on the front of your TV for
more than a few minutes, call your local service center.
□
Check the TV / VIDEO settings; when watching TV, set
to TV; when watching video equipment, set to VIDEO
(page 19).
Make sure the batteries have been inserted correctly
into the remote control.
Check your PARENTAL CONTROL settings (pages
28-29).
Try another channel, it could be station trouble.
Adjust PICTURE in the VIDEO menu (page 19).
Adjust BRIGHTNESS in the VIDEO menu (page 19).
Check the antenna and/or cable coimections (page 3).
Press so that MUTING disappears from the
screen (page 13).
Check your AUDIO settings. Your TV may be set to
SAP (page 21).
□
Adjust COLOR in the VIDEO menu (page 19).
□
Check the CABLE setting iri the cSi^
menu (page 24).
□
Check the antenna and/or cable connections (page 3).
□
Make sure the channel selected is currently
broadcasting.
□
Press the o button on the remote control.
□
□
□
□
□ '
□
34