Sony TC-WR565 - Manual (Page 12)

Advanced Recording Operations
Recording Your Own Program
(RMS Dubbing)
You can record an RMS program that you've created
(see "Creating Your Own Program (RMS Play)" on
page 9). This function works only at normal speed.
RMS/START NORMAL
1 Insert the recorded cassette into deck A and a blank
cassette into deck B.
Make sure the record-protect tabs on the cassette in
deck B have not been removed.
2 Program tracks on deck A (see Steps 1 to 5 on page
9).
3 Press NORMAL to change the tape deck to dubbing
standby.
4 Select the side of the tape in deck B you want to
record on.
To start recording Press
On the front side o
On the reverse side
5 Press mS/START or 11 PAUSE to start RMS
Dubbing.
To Stop RMS Dubbing
Press ■ on deck B. The RMS program remains even after RMS
Dubbing stops.
To insert a blank space on the tape before you start
RMS Dubbing
You can ii\sort a blank space of 4 seconds or more on the
tape in deck B by pressing O REC MUTE after Step 4.
For details, see ''inserting a Blank Space During Recording
(Record Muting)" on this page.
'Q' A blank of 10 seconds is automatically inserted on the
tape when you start RMS Dubbing if:
- vtui insert a new cassette into deck B.
the tape in deck B is compietelv rewound to its
bi'ginning and automatically stopped.
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between each
track. The blank spaces allow you to locate the start of
specific tracks afterwards using the Multi-AMS
function (see page 8). You can also use this lurichon io
erase unwanted portions on a tape.
t>
II PAUSE O REC MUTE
1 Start recording.
2 I’ress O REC MUTE where you want to insert a
blank space.
"REC" flashes in the display and a blank is recorded
on the tape.
After 4 seconds, "II" lights up and the tape deck
changes to recording pause.
3 Press II PAUSE or O to resume recording.
'Q' If you want to insert a blank space longer than 4
seconds
Hold down O REC MUTE as long as you want. After 4
seconds, "REC" flashes faster.
When you release
O REC MUTE, "II" lights up and the
tape deck changes to recording pause.
Press II PAUSE or t> to resume recording.
I
12