Specifications, System, General – Sony TC-WR565 User Manual

Page 16: Supplied accessories, Optional accessory, Inputs, Outputs, Additional information

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Additional Information

Specifications

System

Recording system

4-track 2-channel stereo

Fast-winding time (approx.)

90 sec. (with Sony C-60 cassette)

Bias

AC bias

Signal-to-noise ratio (at peak level and weighted with Dolby NR off)

Type I tape, Sony Type I (NORMAL): 55 dB
Type II tape, Sony Type II (HIGH): 57 dB
Type IV tape, Sony Type IV (METAL): 58 dB

S/N ratio improvement (approximate values)

With Dolby B NR on: 5 dB at 1 kHz, 10 dB at 5 kHz
With Dolby C NR on: 15 dB at 500 Hz, 20 dB at 1 kHz
With Dolby S NR on (TC-WR665S only): 10 dB at 100
Hz, 24 dB at 1 kHz

Harmonic distortion

0.4% (with Type I tape, Sony Type I (NORMAL):

160 nWb/m 315 Hz, 3rd H.D.)

1.8% (with Type IV tape, Sony Type IV (METAL):

250 nWb/m 315 Hz, 3rd H.D.)

Frequency response (Dolby NR off)

Type I tape, Sony Type I (NORMAL): 30 - 15,000 Hz
(±3 dB, lEC)
Type II tape, Sony Type II (HIGH): 30 -17,000 Hz
(±3 dB, lEC)
Type IV tape, Sony Type IV (METAL): 30 - 18,000 Hz
(±3 dB, lEC)
30 -13,000 Hz (±3 dB,

-4

dB recording)

Wow and flutter

TC-WR665S:
±0.13% W. Peak (lEC)

0.07% W. RMS (NAB)

±0.18% W. Peak (DIN)
TC-WR565:
±0.14% W. Peak(IEC)

0.08% W. RMS (NAB)

±0.19% W. Peak (DIN)

Headphones (stereo phone jack)

Output level: 1 mW at a load impedance of

32 ohms

General

Power requirements

Where purchased

Power requirements

U.S.A. and Canada

120 V AC, 60 Hz

U.K. and Continental Europe 220 - 230 V AC, 50/60 Hz

Australia

240 V AC, 50/60 Hz

Other countries

120/220/240 V AC,
50/60 Hz

Power consumption

26 W

Dimensions (approx) (w/h/d)

Model for U.K. and Australia:

430

X

123

X

300 mm (w/h/d)

(17

X

4 ^/s

X

ll’/s inches)

Model for other countries:

430

X

123

X

290 mm (w/h/d)

(17 X 4 ”/s X 11'

/2

inches)

including projecting parts and controls

Mass (approx.)

4.5 kg (9 lbs 15 oz)

Supplied accessories

Audio connecting cords (2 phono plugs - 2 phono
plugs) (2)

Optional accessory

Remote commander RM-J902

Design and specifications are subject to change without
notice.

Variable pitch range (approx.)

-30 to +30%-

Inputs

Line inputs (phono jacks)

Sensitivity: 0.16V

Input impedance : 47 kilohins

Outputs

Line outputs (phono jacks)

Rated output level : 0.5 V at a load impedance of

47 kilohms

Load impedance : (Over 10 kiiohms

16

Advertising