Tv and cable box – Sony WEGA KV-32FS12 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Operating Instructions
TV and Cable Box
Cable Box
From
cable
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF jack on the TV.
^ To view channels from your cable box, tune your TV to channel 3 or 4 (as set
on the rear panel of your cable box) and use the cable box's remote control to
change channels.
If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 26).
Advertising
This manual is related to the following products: