Connecting additional equipment, Tv and vcr – Sony WEGA KV-32FS12 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Your TV
Connecting Additional Equipment
TV and VCR
Rear of TV
1
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
^ To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
(Optional connection)
3
If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
^ For optimum picture quality, use S VIDEO instead of the yellow AA' cable.
S VIDEO does not provide sound, the audio cables must still be connected.
^ You can use the button to switch between the VHFAJHF and VIDEO
inputs.