Tv, vcr, and cable box – Sony WEGA KV-32FS12 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
TV, VCR, and Cable box
Rear of TV
1
2
3
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the IN jack on your VCR.
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
^ If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 26).
(Optional connection)
4
If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
^ For optimum picture quality, use S VIDEO instead of the yellow AA/ cable.
S VIDEO does not provide sound, the audio cables must still be connected.
^ You can use the button to switch between the VHFAJHF and VIDEO
inputs. __
8