Clarion DXZ575USB - Manual (Page 20)

CD/MP3/WMA/AAC Operations
English
18
DXZ575USB
Loading a CD
1. Press the [ OPEN ] button to access the CD
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the or mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
3. Close the FLIP DOWN PANEL.
∗
Press the center of the DCP to close.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Pausing play
1. Press the [ ] button to pause play.
“ PAUSE ” appears in the display.
2. To resume CD play, press the [ ]
button again.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA/AAC disc and user titles input with this
unit.
1. Each time you press the [ D ] button, the title
display changes in the following order:
● CD-TEXT disc
Track ➜ Disc/Artist ➜ User ➜ Track ...
● MP3/WMA/AAC disc
Track ➜ Folder ➜ Title/Album ➜ Artist ➜
Track ...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “ NO TITLE ” appears in the
display.
• If MP3/WMA/AAC disc is not input TAG, “ NO
TITLE ” appears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.
Selecting a track
● Track-up
1. Push the [ SEEK PANEL ] rightward to move
ahead to the beginning of the next track.
2. Each time you push the [ SEEK PANEL ]
rightward, the track advances ahead to the
beginning of the next track.
● Track-down
1. Push the [ SEEK PANEL ] leftward to move
back to the beginning of the current track.
2. Push the [ SEEK PANEL ] leftward twice to
move back to the beginning of the previous
track.
DXZ575USB_EN.book 18 ページ ２００６年１２月２５日 月曜日 午後１２時５７分